How To Change Blade On Craftsman Table Saw

As we know already that nothing is impossible, but everything might involve some technical steps. In this we learn how to change blade on miter saw

If you do not go through those technical steps and do not learn those technical factors step by step correctly, then you might mess things up and later curse everything as difficult or even impossible.

Many people keep wondering how to change blade on miter saw, and some of the people even stop taking care of the blade on their miter saw just because they think it would be quite challenging to change the blade.

So just in a blink of a little bit of hesitation, they ignore it completely, which results in the broken and bad blade, improper cutting, and unprofessional outcomes.

Related Article

How To Chose The Best Miter Saw Blade
How To Change Blade On Ryobi Miter Saw
How To Change Blade On Craftsman Miter Saw

How To Know It Is Time To Change The Blade On A Miter Saw?

It is a commonly asked question by the people who come across miter saw regularly, that, when should they change the blade.

It is essential to know the right time to change your blade. In order to avoid any inaccurate or improper cutting the blade is changed.

One important thing you should keep in mind is that your blade will start having burns spots and chippings on it. You can quickly review this.

You have to check your blade for any chipped or missing pieces, so if you find these signs, know that it is time to say goodbye to your old blade and say hello to new one.

However strong and good your old blade of miter saw may be, there always be a time when you will have to change it, so always know how to do it before you feel in need to change it.

Your old blade has to be chipped off and wrecked to replace it. Some people like to use different blades for different projects, and that is a really good practice.

Doing this also leaves you with an idea about how much your specific project is consuming your blade.

This article is helpful for people who face difficulty in changing the blade. The people who are unaware and ignorant of how to change blade on a miter saw can also take benefit through this article.

Step By Step Ultimate Guide-How To Change Blade On Miter Saw.

miter-saw-blade-featres

Step 1:

First and foremost, make sure you have unplugged your miter saw as just turning it off should not be the case, as you might think it is switched off, so keeping it plugged is not a big deal, so here is a big WARNING!

Do not ever do that, make sure it is unplugged, and then do any other activity such as cleaning or changing the blade.

Forgetting to unplug it might cause horrible injuries; it is the electrical saw which we are dealing with, so again please make sure it is unplugged!

Step 2:

The next step involves pulling off the blade guard, you can easily do that, and you might need to lose the screw, which is screwing the blade guard.

You now need to pull the hardware backward, so this will give you access to the screw.

Step 3:

Now you have full access to the blade, so you need to find the lock pin of the blade; it is, in most cases, found on the right side of the miter saw, and usually, it is found in the black color.

Now hold the button with your right hand (if you are not left-handed) and with wrench handle, which should be pointed towards you, push it down.

Another important point to consider is some types of saws do not have a lock pin; in that case, you can use something like a piece of wood; place the wood below the blade of the miter saw and then try lowering the blade slowly down to the wood.

The act of lowering the blade should stop the blade from moving, and meanwhile, you can remove the bolt; in case your saw has a locking pin, then you depress the pin and rotate the blade of the miter saw until you notice that pin has fallen off.

Step 4:

When the pin is locked, you can try removing the bolt using the Allen wrench, and turn the bolt in clockwise direction carefully, or reverse thread might work too, then remove the bolt.

Now you can remove the outer washer, and now you can access the blade flange and the blade, remove the blade flange and the blade too, while doing all these steps, avoid touching the blade's teeth as this might hurt your hands.

It is recommended to put on working gloves while undoing the blade; however, do what is more convenient and comfortable for you.

Step 5:

Now you have everything successfully, you just now need to change the blade of the miter saw, if you find out outer and inner washer has oil, then you should clean it properly.

Put the blade on your miter saw carefully, and then redo the blade flange and the bolt of the blade, make sure the blot of the blade is screwed firmly in a counterclockwise direction.

After that, lower the locking pin of the blade, and screw the bolt using wrench. Finally, lower the safeguard hardware of your blade.

You should ensure that it is back on its position. Then tight the screw firmly using screwdriver. Congratulations you have successfully changed the blade on your miter saw.

It was not quite a difficult thing to achieve; however, you will find it way easier with time and practice, so that is how we change the blade on a miter saw.